2019 Supply High Quality Ferro Silicon / FeSi 75% / SiFe Lump

Product Overviews

Ferro Silicon is used as an essential alloy in the production of steel and cast iron,Ferro Silicon is used to remove oxygen from steel and as alloying element to improve the final quality pf the steel.Ferro Silicon can also be the basis for manufacture of pre-alloys like Magnesium Ferro Silicon (FeSiMg),used for modification of melted malleable iron.

Main markets are the worldwide producers of alloyed,stainless and carbon steel.One of the fastest growing categories within steel is the stainless sector,in both flat and long products.Stainless steel has a specific consumption of Ferro silicon 5-10 times higher than regular carbon steel.

Special Ferro Silicon grades,like low Al,high purity and low Carbon Ferro Silicon,are used in the production of special steel qualities.Compared to regular Ferro Silicon,Special grades of Ferro Silicon will help to keep both the content of inclusions and the carbon content in the final steel at very low levels.

Product Parameter

Product grades	Chemical Composition(%)
	Si	Al	Ca	Mn	Cr	P	S	C
		≤
FeSi75A10.5-A	74.0-80.0	0.5	1.0	0.4	0.3	0.035	0.02	0.1
FeSi75A10.5-B	72.0-80.0	0.5	1.0	0.5	0.5	0.04	0.02	0.2
FeSi75A11.0-A	74.0-80.0	1.0	1.0	0.4	0.3	0.035	0.02	0.1
FeSi75A11.0-B	72.0-80.0	1.0	1.0	0.5	0.5	0.04	0.02	0.2
FeSi75A11.5-A	74.0-80.0	1.5	1.0	0.4	0.3	0.035	0.02	0.1
FeSi75A11.5-B	72.0-80.0	1.5	1.0	0.5	0.5	0.04	0.02	0.2
FeSi65	65.0-72.0			0.6	0.5	0.04	0.02

Size: 0-3mm,3-10mm,10-50mm,10-100mm or by per customer's requirement.

Remark: Specification and size can be optimized by per customer's requirement.